Sage Nutri Juicer BJE410UK - Manual (Page 15)

14
oPEratIng yoUr nEW aPPlIanCE
5. As fruit and vegetables are
processed, juice will flow into the
juice jug and the separated pulp will
accumulate in the pulp container.
notE
The pulp container can be emptied
during juicing by turning the juicer
OFF at the control panel and then
carefully removing the pulp container.
Replace empty pulp container before
continuing to juice.
Do not allow the pulp container
to overfill as this may affect the
operation of the appliance.
notE
To minimise cleaning, line the pulp
container with a plastic freezer bag to
collect the pulp. Pulp can then be used
for other dishes, or as compost for
gardens or discard.
notE
To include the froth with your juice,
simply remove the lid of the juice jug
when pouring juice into the glass.
notE
The juicer is fitted with a safety device
which safeguards against overheating
with excessive loads. If overheating
occurs, the juicer will automatically
activate the overload protection
device and the unit will switch itself
off. When the overload protection is
activated, unplug the Juicer from the
power outlet for at least 15 minutes to
allow the unit to cool. Then plug juicer
into the power outlet and use
as normal.
WARNING
Never use fingers to push food down
the feed chute or to clear the feed
chute. Always use the food pusher
provided.