Ring Communications DNA200 - Manual (Page 14)

DNA200 OPERATIONS MANUAL 14 2008/05/01
CAMERA ADDRESS
Assign a video camera to an intercom station.
Assign a preset to an intercom stations with camera (preset tilt, pan, zoom etc.)
PROGRAMMING
The following commands are used for this feature.
SCA
Set Camera Address
SPN Set Preset Number
LCN List Call Number
Example:
Set camera address for intercom call number 102 to address 200, Preset 1.
>SCA
cr
Call Number <10..9999> : 102
cr
Camera Address <0..FFFF> : 200
cr
>SPN
cr
Call Number <10..9999> : 102
cr
Camera Preset <0..FFFF> : 1
cr
>LCN
cr
Call Number <10-9999/*> : 102
cr
Intercom Monitor Camera Camera
Call Number Address Address Preset
=========== ======= ======= ======
102 200 1
BLACK CAMERA
When a call is cancelled on the intercom system a string is sent to the switch containing the monitor number
and camera number 0. This will blank the monitor on some switchers. If a camera address is assigned to call
number 9999 then this camera address will be used to blank the monitor.
LOGIN, LOGOUT
Call number 9998 is reserved for Login activation. Monitor = User Number, Camera = Password.
1. Send Login (if 998 is programmed)
2. Send Monitor to Camera connect
3. Send Camera Preset (if programmed)
4. Send Logout (if 998 is programmed)