Ring Communications DNA200 - Manual (Page 13)

DNA200 OPERATIONS MANUAL 13 2008/05/01
CALL NUMBERS
All intercom stations are assigned call numbers in the Ring intercom central exchange.
The DNA200 Camera Switcher interface assigns Monitor Address and Camera Address to the intercom
call numbers. This assignment is stored in the DNA200 and may bel listed with the command LCN from the
PC connected to the DNA100.
The call number may be 2,3 or 4 digit decimal.
The camera and monitor address may be 1,2 3 or 4 digit HEX.
The camera or monitor may be removed from a call number by entering 0 as the address.
>LCN
cr
Call Number <10-9999/*> : 100-110
cr
Intercom Monitor Camera Camera
Call Number Address Address Preset
=========== ======= ======= ======
100 10
101 11
102 200
103 201
104 202
>
MONITOR ADDRESS
Assign a video monitor to an intercom station.
PROGRAMMING
The following commands are used for this feature.
SMA
Set Monitor Address
LCN List Call Number
Example: Set monitor address for intercom call number 100 to address 10.
>SMA
cr
Call Number <10..9999> : 100
cr
Monitor Address <0..FFFF> : 10
cr
>LCN
cr
Call Number <10-9999/*> : 100
cr
Intercom Monitor Camera Camera
Call Number Address Address Preset
=========== ======= ======= ======
100 10