Ring Communications DAD104b OPERATIONS MANUAL - Manual (Page 7)

March 2012 Operations Manual DAD104
will control the audible tone speed.
The queue counter will show the number of calls in progress. The user should always note the status
of the event signal (A
LARM
, C
ALL
, F
AULT
, P
ARK
) before responding since the incoming status of the event
will not be apparent when answered.
HANDLING AN EVENT - The DISPLAY line ANSWER keys
Once the status has been observed, an active display line can be answered by pressing the A
NSWER
key to the left of the active D
ISPLAY
L
INE
. When the A
NSWER
key is pressed the display will stop flashing,
the audible tone will stop, and the controller will connect the intercom master station at the DAD104
with the station that is calling. A warning tone will sound at both stations, and you may begin speaking
after the tone. The intercom will normally switch your voice hands free, although it may be necessary
or desirable to use the ‘T’ button on the intercom station for simplex operation (push to talk) to
overcome background noise at either location. The ‘T’ may also be used whenever you want to
continue monitoring a station for information or security reasons.
PRIORITY OVERRIDE -
The master station at the DAD104 should be programmed with the “Priority override” privilege . If a
busy or privacy signal is encountered, you may then press the ‘0’ key on the intercom to override the
signal and obtain voice contact before the intercom times out (default is 15 seconds).
PARK - The P key
P
ARK
is used to temporarily hold calls that you need to get back to after handling other events or
obtaining information.
REMOTE CONTROL - The R key
This key is used for Door Lock Control of the connected Intercom.
CANCEL A CONNECTION - The X key
When the intercom call is completed, press the C
ANCEL
key on the DAD104, this will cancel both the
intercom channel and the event on the current D
ISPLAY
L
INE
.
A F
AULT
will return within two seconds after being canceled if it is a solid F
AULT
. Each substation may be
scanned for faults, detection time is 2 seconds.
HANDLING MULTIPLE INCOMING ANNUNCIATION -
When the Q
UEUE
indicator displays a number more than four (4), you can use the S
CROLL
U
P
/ D
OWN
keys to view the additional events and decide which lines should be handled first. If the scrolling
Page7
Ring-Master