Radio mode operations, English, Fm reception – Clarion DX425 User Manual

Page 10: Listening to the radio, Mute, Manual tuning, Seek tuning, Preset scanning (preset station scan), Instant station recall (isr)

Radio Mode Operations

FM Reception

For enhanced FM performance the

tuner includes signal actuated stereo control and
Multipath noise reduction circuits.

Listening to the Radio

1) Press the FUNC button

to select the radio

mode, then the radio will be on.

2) To select a preset band, press the BAND but-

ton

, then select one of the preset bands

such as FM1, FM2, FM3, or AM. Every time
the BAND button

is pressed, the display

will change as:
F1 (FM1)

➜

F2 (FM2)

➜

F3 (FM3)

➜

F1 (FM1)

3) Press the SRCH Left/Right button

, then

the station at which there is a broadcast will
be selected (Seek selection).

Mute

Use this function to turn off the sound immedi-
ately.
Press the MUTE button

. The sound turns off

and “MUTE” appears on the display. Press the
MUTE button again to cancel the mute mode.

Manual Tuning

1) Press the BAND button

, then select FM1,

FM2, FM3 or AM.

2) Press and hold the BAND button

for 1 sec-

ond or longer, then the display will show
“MANU”, which means that a manual selec-
tion function is on.

3) Press the SRCH Left/Right button

and

select the right station.

Seek Tuning

1) Press the BAND button

, then select FM1,

FM2, FM3 or AM.

2) If the “MANU” on the display is on, press and

hold the BAND button

for 1 second or

longer. When the “MANU” display is off, the
Seek Selection function is on.

3) Press the SRCH Left/Right button

, then

when it selects the station in which there is a
broadcast, it automatically stops.

Preset Memory Function

Preset Memory Function can store up to 24 sta-
tions: six stations for each of FM1, FM2, FM3
and AM.

Note:

•

When the present memory function is used, all the
content of the memory will be erased.

Manual memory function

1) Press the BAND button

, and select the

band you want to store in the memory.

2) Press the SRCH Left/Right button

then

select the station you want to store in the
memory.

3) Press and hold the Preset button

for 2

seconds or longer, then the station will be
stored in the memory.

Auto store function (Automatic Station Store)

1) Press the BAND button

, then select the

band you want to store in the memory.

2) Press and hold the AS button

for 2 sec-

onds or longer, then the station at which the
reception is the strongest will be automatical-
ly stored in the memory.

Note:

•

When the number of stations stored is less than six,
the previous content of the memory for each direct
button will be retained.

Preset Scanning (Preset Station Scan)

When the PS button

is pressed, the preset

memory numbers flash and the stations are
tuned in for 7 seconds each in the order in which
they were stored. Press the PS button

again

to cancel the preset scanning mode.

Instant Station Recall (ISR)

With this function, a specific radio station can be
recalled from any mode.

ISR memory

1) Press the FUNC button

, then select the

radio mode.

2) Select the radio station which you want to

store in the memory.

3) Press and hold the ISR button

for 2 sec-

onds or longer.

DX425

English