Focusing, Freezingimage, Brightnessadjustment – QOMO QD3800 User Manual

Page 13: Whitebalanceadjustment, Autoadjustment, Text/imagemode, Colorandb&wmodeswitch, Freezing image, Brightness adjustment, White balance adjustment

FOCUSING

When the visualizer is turned on the focus automatically adjusts to the

stage, Only 3D objects require a focus adjustment.

Press the “AUTO” button to auto focus.

Press the “FAR” or “NEAR” button to focus manually.

FREEZING

FREEZING IMAGE

IMAGE

To show a still image on the screen, when the output signal is RGB, press

the “Frz” button. The frozen image cannot be adjusted (Zoom in/out, color

adjustment, etc.).

BRIGHTNESS

BRIGHTNESS ADJUSTMENT

ADJUSTMENT

If the image effect is not satisfactory, you can adjust the brightness to get a

better image effect. Use the “BRIGHT +” or “BRIGHT -” button to adjust the

brightness. To increase the brightness, press the “BRIGHT +” button. To

decrease it, press the “BRIGHT -” button.

WHITE

WHITE BALANCE

BALANCE

BALANCE ADJUSTMENT

ADJUSTMENT

Each time the lighting condition changes, the user should adjust the white

balance of the camera.

Press the “AUTO” button to adjust the white balance automatically.

AUTO

AUTO ADJUSTMENT

ADJUSTMENT

One of the visualizer’s special functions is auto adjustment. Press the

“AUTO” button to auto adjust the white balance and the focus.

TEXT/IMAGE

TEXT/IMAGE MODE

MODE

Press the “Text” button to switch between image/text modes. To display a

text file, switch to the text mode to get a clearer text effect.

COLOR

COLOR AND

AND

AND B&W

B&W

B&W MODE

MODE

MODE SWITCH

SWITCH

Press “B&W” once to enter the Black & White mode; press again to return

to the Color mode. (On the remote control)