Accessories, Pro7hc touchscreen controls – Power Plate pro7HC User Manual

Page 10

ish

Maintenance

WARNING: THE MACHINE

CONTAINS NO USER-SERVICEABLE

PARTS. PLEASE CONTACT AN

AUTHORISED POWER PLATE

SERVICE PROFESSIONAL

FOR ANY MAINTENANCE OR

TROUBLESHOOTING NOT

OTHERWISE DESCRIBED BELOW,

OR PERSONAL INJURY OR DAMAGE

TO THE MACHINE COULD RESULT.

CAUTION: Any changes, modifications,

or unauthorised maintenance performed

to or on the machine could void the

product warranty.

Always unplug the machine and let stand

for at least one minute before performing

any maintenance.

Clean the machine only with a moist cloth.

Do not use sharp objects, bristles, scrubs,

or acid-based detergents, because this

will damage the lacquer finish.

Do not spray any cleaning solution directly

onto the machine. Instead, moisten a cloth,

then apply to the machine.

On plastic components, use only polishes

specifically designed for plastic.

Use a soft brush, not a cloth, to clean the

platform, including the contoured mat.

Clean electrical components only with

a dry cloth, in order to avoid the risk of

shock or damage to the components.

Troubleshooting

Always unplug the machine and let stand

for at least one minute before performing

any troubleshooting.

If the machine is not operational and the

console display is not illuminated, check

the power connections to the machine.

If all power connections are proper,

please check the circuit breaker or fuse

for the electrical outlet that is supplying

power to the machine in order to ensure

that the outlet is receiving electrical

power.

If the console display is illuminated, but

the platform will not vibrate, unplug the

machine, wait at least one minute, then

check the connection to the machine’s

motor, located under the base of

the machine.

If the machine makes a rattling noise,

unplug the machine, wait at least one

minute, then check to make sure that

the feet are properly tightened.

DANGER: Power Plate strongly

recommends that the user not try to

resolve any electrical issues regarding the

power source to the machine by oneself.

Instead, power plate strongly recommends

that the user contact a licensed,

professional electrician to conduct any

examination and make any necessary

repairs. Otherwise, serious personal injury

or property damage

could result.

APPLIED PARTS:

applied parts are not

intended to deliver heat during normal
use. The maximum temperature for
applied part may be up to 43degrees
Celsius / 109.4 degree Fahrenheit.

Applied Parts:
• Platform
• Handlebars

Power On / Off

• To Power On the Machine: Press the
rocker switch located on lower back of
the column to indicate “I” position.

• To Power Off the Machine: Press the
rocker switch located on lower back of
the column to indicate “0” position.

Accessories

Pro7HC Accessories
• Straps Set (2pcs)
• Handle Grips (2pcs)
• Exercise Mat
• Protection Cover
• Power Cord
• DVD
• Poster
• Step Deck (option)
• Foam Deck (option)
• Power shield (option)

•

ish

Pro7HC Touchscreen controls

The pro7HC software is organized in four exercise modules: Complete program, Physical Rehab , Manual
Mode & Single Movements

The home page allows a quick access to 4
different exercise mode as:

• Complete program
• Physical Rehab
• Manual Mode
• Single Movements

Home page

Press the middle of Power Plate Logo
on the main screen can access to the
language setting page

• English
• Spanish
• Germany
• Chinese

Language Settings

Complete Program

Physical Rehab

This button takes you to the complete
program module. The exercise are
broken down into 3 areas.

• Neuro Health
• Pain Relief
• Common Condition

This button takes you to the Physical Rehab
mode. It is broken down into 8 areas.

• Shoulder

• Elbow / Wrist

• Hips

• Knee

• Cervical Spine

• Thoracic Spine

• Lumbar Spine

• Ankle / Foot