Menu setup – Channel Vision DVR-4N User Manual

Page 67

MENU SETUP

6.6.1.2 IP ADDRESS
At the NETWORK menu,

Move the cursor to the IP ADDRESS using the © , ª buttons.

Select the desired position using the §

, ¨ buttons and set the data value using the (-), (+) buttons or

wheel scroll of mouse

6.6.1.3 SUBNET MASK
At the NETWORK menu,

Move the cursor to the SUBNET MASK using the © , ª buttons.
Select the desired position using the §

, ¨ buttons and set the data value using the (-), (+) buttons or

wheel scroll of mouse

6.6.1.4 GATEWAY
At the NETWORK menu,

Move the cursor to the GATEWAY using the © ª buttons.

Select the desired position using the

, ¨ buttons and set the data value using the (-), (+) buttons or

wheel scroll of mouse

6.6.1.5 DNS

data value using the (-), (+) buttons or

wheel scroll of mouse

use

At the NETWORK menu,

Move the cursor to the DHCP using the © , ª

Select “ON” using the (-), (+) buttons or wheel scroll of mouse.

Move the cursor to the DYNAMIC SVR using the © , ª buttons.
Input the dynamic server IP using the (-), (+) buttons or wheel scroll of mouse to change the

value and
the © , ª buttons to move the cursor.

At the NETWORK menu,

Select the desired position using the §

, ¨ buttons and set the

6.6.1.6 PORT
At the NETWORK menu

Select the desired position using the §

, ¨ buttons and set the data value using the (-), (+) buttons or

wheel scroll of mo

NOTE: Port setting on DVR and client viewer softw e must be matched.

buttons.

NOTE: DHCP is a protocol for assigning dynamic IP addresses to devices on a network.

** You have to connect with Router in case of using a network of PPPOE type because this unit doesn’t have

a PPPOE protocol.