Menu setup – Channel Vision DVR-4N User Manual
Page 50

-
MENU SETUP
< Result table of total frame rate >
Event Record
Record Type Image Size
Normal Record
Event Channel
Other Channel
Unit
Single
360 x 240
Normal Frame
ES_Frame
RS_Frame
CIF/1 SEC
720 x 240
Normal Frame
ES_Frame
RS_Frame
CIF/1 SEC
720 x 480
Normal Frame
ES_Frame
RS_Frame
CIF/1 SEC
Complex
360 x 240
Normal Frame
EC_Frame
EC_Frame
CIF/1 SEC
720 x 240
Normal Frame
EC_Frame
EC_Frame
CIF/1 SEC
720 x 480
Normal Frame
EC_Frame
EC_Frame
CIF/1 SEC
- ES_Frame : Event single frame rate.
- EC_Frame : Event complex frame rate.
- RS_Frame : Remain single frame rate = ( Max. Frame Rate – ES_Frame) /
15.
Select the desired RECORDING INTERVAL using the (-), (+) buttons or wheel scroll of mouse.
RECORDING INTERVAL means at what-second intervals you want to record.
If you set “RECORDING INTERVAL” to “1SEC”, each channel will be recorded by setting frame
rate per “1SEC”.
Set the IMAGE SIZE of each channel using the (-), (+) buttons or wheel scroll of mouse. There
are the 3 types of 720x480(D
1
), 720x240(Half-D
1
) and 360x240(CIF).
* The default is 720x240.
wheel scroll of mouse.
There are 3
Set the PRE
event is dete
cted period.
¨ buttons if yo
eans
that the event
You can set the frame rate of each channel using the (-), (+) buttons or
- N : Frame rate for normal recording
E : Frame rate for event recording
-
Set the IMAGE QUALITY for normal recording and for event recording of each channel using the
(-), (+) buttons or wheel scroll of mouse.
types, Fine(F)/ Superfine(S)/ Low(L).
TIME and POST TIME using the (-), (+) buttons or wheel scroll of mouse. When the
cted, the DVR will store pre- and post-recorded data during the sele
Choose the type of the EVENT using the (-), (+) buttons or wheel scroll of mouse and © , ª , § ,
u want the event recording(Motion detection/ Video loss/ Alarm) or not. “O” m
T
value o
seconds.
T
N
he
he
f “PRE TIME” is from 0 to5 seconds and the value of “POST TIME” is from 0 to 60
default of pre-recording time is 5 seconds and post-recording is 10 seconds.
ote: The pre- and post- recording is not valid in normal recording mode.
recording is “ON” and “-“ means that the event recording is “OFF”.
49