NUU Wake - Manual (Page 5)

5
Action Button
The Action button has the Bluetooth symbol embossed into it as well as a Play/Pause icon silkscreened above it .
This button controls:
• Pairing of Bluetooth device • Play/Pause • Re-connect
TO PAIR THE WAVE WITH YOUR BLUETOOTH DEVICE:
1. Switch on the NUU Wave. The Bluetooth Status LED will fl ash slowly.
2. Press and hold the Action Button for about ~3 seconds. You will hear a double-beep (low-low) and the
Bluetooth Status Light will fl ash quickly. The NUU Wave is now in pairing mode.
3. Enable Bluetooth on your phone or other device.* Then select “NUU Wave” from the list of discoverable devices.
4. If prompted for a PIN code, enter “0000” (4 zeros).
5. It will take between 10-15 seconds for the NUU Wave to pair with your device. When pairing is successful, you will
hear a two-tone (low-high) sound and the Bluetooth Status LED will remain steadily lit.
*NOTE: Procedures for activating Bluetooth will vary across devices. Consult the documentation that came with your
phone or other device for further information.
c