NUU Riptide - Manual (Page 21)

Problems with sound?
1. For sound distortion, try lowering the volume on the NUU
Riptide and/or your phone/device.
2. Move the NUU Riptide closer to your phone/device.
3. Connect your phone/device to the NUU Riptide via the
3.5mm input cable rather than Bluetooth. Ensure that the
cable is fully inserted at both ends.
4. Ensure that both devices are sufficiently charged.
Not responding to commands such as
volume change, play/pause, pair, etc.?
1. Switch the NUU Riptide off and then on again.
2. If there is still no response after step 1, connect the unit to
the supplied power adapter and repeat step 1.
3. If there is still no response after steps 1-2, reset the NUU
Riptide by pressing the volume up and volume down
buttons at the same time.
4. Ensure that both devices are sufficiently charged.
20
Riptide_UserManual_Final.indd 21 7/17/2014 3:07:13 PM