Modern AG Grapple - Manual (Page 13)

Grapple - 13
OPerATiNG SeCTiON
• Never allow anyone to walk or work under a raised
loader.
• Operate the loader hydraulic controls smoothly,
avoiding jerky operation.
• Stop loader gradually when lowering or lifting loads.
• Be sure that people, livestock, or pets are not standing
near the machine while operating.
• Do not lift or carry anyone on loader or in bucket or
attachment.
TrANSPOrTiNG THe lOAD
Avoid serious injury.
• Raise the load to the minimum height required for the
terrain that must be crossed with the load.
• Operate the prime mover so that the load always
remains level.
• Accelerate, turn, and brake gradually.
• Avoid any obstacles, bumps, or holes in your intended
path.
• Frequently check the load to make sure that the load
has not become unstable.
STOrAGe
• Storage location should be level and solid to make
connecting and disconnecting easy.
• Always store in a clean, dry location away from
children and livestock.
• Leaving the unit outside will materially shorten its
life.
• Clean the unit thoroughly, removing all mud, dirt and
grease.
• Inspect for visible signs of wear, breakage, or damage.
Order any parts required, and make the necessary
repairs to avoid delays when starting the next job.
• Tighten loose nuts, capscrews, and hydraulic
connections.
• Cap hydraulic couplers to protect against
contaminates.
• Touch up all unpainted surfaces with paint, to prevent
rust.
• Coat the exposed portions of the cylinder rod with
grease.
• Grease the unit.
WArNiNG