Gearbox maintenance cutter lubrication points – Modern AG 8' Predator User Manual
Page 50

50 - 8' Predatorrr
gEaRBox
the oil level should be checked and maintained at
a “full” level. to fill, remove the oil fill plug (1), the
overflow plug (2), add oil until oil overflows.
Figure 1.
Note: 90wt. or 90 EPO oil is recommended.
Note: Make sure cutter is level when checking oil in the
gearbox.
Note: Failure to remove 1/4” overflow plug may cause
overfilling. Overfilling of gearbox will cause pressure to
build up and cause oil seals to leak.
TaILwHEEL:
Grease fitting on hub of wheel. Figure 2. Grease
after every 4 hours. also, a grease fitting is
provided on the tailwheel boom at caster pivot
point. Figure 3. Grease after every 4 hours use to
provide maximum trouble free service.
Figure 1
Figure 2
Figure 3
gEaRBox MaInTEnancE
cUTTER LUBRIcaTIon PoInTS
Driveline Lubrication
Tailwheel boom
bushing every
8 hrs.
Tailwheel hub
every 8 hrs.
check fluid in
gearbox daily.
1
2