Modern AG 8' Predator - Manual (Page 30)

oPERaTIon SEcTIon
Tractor Pre-operation Inspection/Service
Refer to the tractor operator’s manual to ensure a complete pre-operation inspection and
scheduled service is performed according to the manufacturers recommendations. the following
are some of the items that require daily service and inspection:
• tire condition/air pressure
• Wheel lug bolts
• Steering linkage
• PtO shield
• SmV sign is clean and visible
• tractor’s lights are clean and functional
• tractor Seat belt is in good condition
• tractor ROPS is in good condition
• ROPS is in the raised position
• no tractor oil leaks
• Radiator free of debris
• engine oil level and condition
• engine coolant level and condition
• Power brake fluid level
• Power steering fluid level
• Fuel condition and level
• Sufficient lubrication at all lube points
• air filter condition
cutter Pre-operation Inspection/Service
Before each cutter use, a complete inspection and service is required
to ensure the cutter is in a good and safe working condition.
Damaged and/or broken parts should be repaired and/or replaced
immediately. to ensure the cutter is ready for operation, conduct the
following.
the operator’s manual and safety signs affixed on the unit contain
important instructions on the safe and proper use of the equipment.
maintain these important safety features on the implement in good
condition to ensure the information is available to the operator at
all times.
• ensure the manual canister is secured to the equipment with the operator’s manual inside.
• ensure all safety signs are in place and legible. Replace missing, damaged, and illegible decals.
30 - 8' Predatorrr