beautypg.com

Mercedes-Benz E 300 1996 Emergency Operation User Manual

Page 41

background image

116

Engine Cleaning

Prior to cleaning the engine

compartment make sure to protect

electrical components and connectors

from the intrusion of water and cleaning

agents.

Corrosion protection, such as MB

Anticorrosion Wax should be applied to

the engine compartment after every

engine cleaning. Before applying, all

control linkage bushings and joints

should be lubricated. The poly-V-belt

and all pulleys should be protected from

any wax.

Car Washing

Do not use hot water or wash your car

in direct sunlight. Use only a mild car

wash detergent, such as Mercedes-

Benz approved Car Shampoo.

Thoroughly spray the car with a

diffused jet of water. Direct only a very

weak spray towards the.

ventilation intake. Use plenty of water

and rinse the sponge and chamois

frequently.

Rinse with clear water and thoroughly

wipe dry with a chamois. Do not allow

cleaning agents to dry on the finish.

If the vehicle has been run through an

automatic car wash - in particular one

of the older installations -rewipe the

recessed sections in the taillamps

(designed to prevent soiling) if

necessary. No solvents (fuels, thinners

etc.) must be used.

In the winter, thoroughly remove all

traces of road salt as soon as possible.

When washing the underbody, do not

forget to clean the inner sides of the

wheels.

Tar Stains

Quickly remove tar stains before they

dry and become more difficult to

remove. A tar remover is recommended.

Window Cleaning

Use a window cleaning solution on all

glass surfaces. An automotive glass

cleaner is recommended.

Headlamps, Taillamps,

Turn Signal Lenses

Use a mild car wash detergent, such as

Mercedes-Benz approved Car

Shampoo, with plenty of water.

To prevent scratches, never apply

strong force or use a hard cloth when

cleaning the lenses. Do not attempt to

wipe dirty lenses with a dry cloth or

sponge.

Plastic and Rubber Parts

Do not use oil or wax on these parts.

Wiper Blade

Clean the wiper blade rubber with a

clean cloth and detergent solution.

Replace blade twice a year; once

before and once after winter.