Mercedes-Benz SL-Class 2003 COMAND Manual - Manual (Page 188)

180
Navigation
Settings
̄ Settings
COMAND normally determines the vehicle
location automatically with the GPS. In ex-
ceptional cases, this may not be possible.
You can then enter the current vehicle lo-
cation manually in connection with a
crossroad.
̈ Turn the right-hand rotary/push-
button
v to highlight “Settings” in the
main destination input menu and press
to confirm.
̈ Turn the right-hand rotary/push-
button
v to highlight “Location...” and
press to confirm.
The input menu to enter the city will ap-
pear.
̈ Enter the city/suburb and then the
street and select the required entries
from the corresponding list. See “Ente-
ring destination address”
(
୴ page 123).
After you have selected the street, you will
see a prompt for the intersection.
̈ Turn the right-hand rotary/push-
button
v to highlight the appropriate
cross street and press to confirm.
The input menu “Location/Intersec-
tion” will appear.
Location is ahead or behind an intersection
̈ Turn the right-hand rotary/push-
button
v to the right (location is
ahead) or to the left (location is behind)
and press to confirm.
The message “Chosen location accep-
ted” will appear.
̈ Press the right-hand rotary/push-
button
v to confirm.
Entering the vehicle location