Mercedes-Benz S-Class 2006 COMAND Manual - Manual (Page 68)

66
Audio
DVD operation
If the video DVD meets the playback
requirements (
୴ page 64), playback
will begin.
If available, the DVD menu ( ୴ page 70)
saved on the DVD will appear.
If the video DVD does not have regional
code 1 (
୴ page 64), the following
message appears: DVD Cannot be
Played - Invalid Regional
Code
.
Further error messages are:
ț No DVD
No DVD inserted in the slot.
̈ Load a DVD ( ୴ page 65).
ț No Valid DVD
Cannot read DVD.
̈ Load a DVD ( ୴ page 65) which
meets the DVD playback require-
ments (
୴ page 64).
ț DVD Error
DVD cannot be read or is damaged.
̈ Load another DVD ( ୴ page 65).
ț DVD Device Error
The drive may be damaged.
̈ Contact an authorized Mercedes-
Benz Center.
̈ With the COMAND switched on, press
l.
The display moves up and the system
ejects the DVD already loaded.
̈ Remove the DVD from the slot.
̈ Insert another DVD into the slot.
or
̈ Press l again to close the slot if you
do not wish to insert another DVD.
Ejecting a DVD
i
If you do not remove the DVD from the
slot within around 15 seconds, the
COMAND will pull the DVD into the
drive again and close the slot.
220_Audio_US_A_2006.fm Seite 66 Mittwoch, 22. Dezember 2004 2:29 14