Mercedes-Benz E-Class 2006 COMAND Manual - Manual (Page 164)

163
System
System settings
Setting the time
The UTC time transmitted by the GPS sat-
ellites has to be set to the local time zone.
This enhances
ț correct navigation for routes with time-
dependent traffic guidance, and
ț correct calculation of the estimated
time of arrival.
̈ Use  or  to select the hours or
the minutes.
̈ Press  or .
Depending on the selection, hours or
minutes are set.
Setting the minutes:
With GPS reception, each time you
press  or  changes the time in in-
crements of 30 minutes. Without GPS
reception, the time is changed in 1
minute increments.
Setting the hours:
Each time you press  or , the
hours change in increments of 1 hour.
̈ Press the Back soft key.
The new setting is stored.
Setting the date
̈ Use  or  to select the day, the
month or the year.
̈ Press  or .
Depending on the selection, the day,
the month, or the year is set.
̈ Press the Back soft key.
The new setting is stored.
Setting the date/Time format
̈ Press the Format soft key.
You will see the date and time following
the currently selected format, as well
as a list of possible formats.
i
There is no automatic change from day-
light saving time to standard time.
This has to be changed manually.
When you change the time zone, the
clock time also changes automatically.
If you enter an incorrect time, the time
difference remains unchanged when
you change time zone.
i
The date can be set only if GPS recep-
tion is available.
୴୴