Mercedes-Benz SL-Class 2007 COMAND Manual - Manual (Page 34)

32
At a glance
Menu system
The main area 2 shows messages and
settings.
You can change the settings by operating
the system.
The status bar 3 is divided into three
areas.
Left side:
The current operating mode is indicated. In
this example: Radio
Center:
The status of the current operating mode
or other selectable functions are indicated.
In this example:
ț FM = current waveband
ț 9 = memory location of station,
e.g. “9”
Right side:
General status information is indicated
independent of the operating mode.
In this example:
ț Ready = Telephone* is ready for
operation
ț = Reception strength of the
mobile phone
Menu functions and submenus
Using the soft keys, functions can be
switched ON or OFF, or submenus can be
called up.
Example: Radio main menu:
ț The FM/AM soft key switches between
FM and AM band.
ț The Scan soft key starts/stops the
channel scan.
In some situations, soft keys may not have
any function and are not operational. A
soft key without function appears shaded
out.