Mercedes-Benz SL-Class 2007 COMAND Manual User Manual
Page 154
152
Navigation
Route guidance
Muting current voice instructions
̈
Press
J.
The current announcement is stopped.
You will hear the next navigation
announcement normally.
Switching voice instructions On/Off
Switching off
̈
During a navigation announcement
press
J for 2 seconds.
You will hear a confirmation beep if the
beep tones option was activated in the
system settings (
୴
page 217).
The message
Voice Announcements
Muted
will appear briefly. Further route
guidance takes place using only the
symbols in the display. If a new route
guidance cycle is started, the
announcements are automatically
switched on again.
Switching on again
̈
Press
j.
The navigation displays are only visible
while route guidance is active.
To switch to the navigation display from
another display, e.g. from CD operation:
̈
Press
b or c.
Two examples are shown below:
Display example 1:
The road you are currently driving on is
shown on the status bar, in this case
I-90
.
The indication
120 mi
is the distance to
the next driving maneuver.
If the GPS position display (
୴
page 170) is
active, the GPS data are shown instead of
the street name.
Navigation displays
i
Using the multifunction steering wheel
buttons, the display unit can be
changed between km or miles (see
your vehicle’s Operator’s Manual).
ț
When the display unit is set to
miles, the COMAND will indicate
distances in miles (mi) or feet (ft).
ț
When the display unit is set to km,
the COMAND will indicate
distances in kilometers (km) or
meters (m).