Mercedes-Benz SL-Class 2007 Owners Manual - Manual (Page 321)

320
Operation
Maintenance
1 Reset button
̈ Press reset button 1 on the instru-
ment cluster.
The maintenance service indicator
message is cleared and the standard
display appears in the multifunction
display (
୴ page 145).
Maintenance service term exceeded
If you have exceeded the suggested main-
tenance service term, you will see the fol-
lowing message in the right multifunction
display:
Service A exceeded by XXXX miles (km)
Service A exceeded by XXX days
In addition, a signal sounds when the mes-
sage appears.
Any authorized Mercedes-Benz Center will
reset the maintenance service indicator
following a completed maintenance ser-
vice.
Calling up the maintenance service
indicator display
You can call up the maintenance service in-
dicator display at any time to check when
the next maintenance service is due.
̈ Switch on the ignition ( ୴ page 39).
̈ Press button è or ÿ on the mul-
tifunction steering wheel repeatedly
until the standard display appears in
the multifunction display (
୴ page 145).
̈ Press button k or j on the
multifunction steering wheel until the
maintenance service indicator display
with the maintenance service symbol
9 or
½ appears in the left mul-
tifunction display and the maintenance
service deadline appears in the right
multifunction display.
i The menu overview can be found on
( ୴ page 142).