Mercedes-Benz CLS-Class 2007 Owners Manual - Manual (Page 428)

427
Practical hints
Towing the vehicle
The towing eye bolt is supplied with the
tool kit (located in the storage compart-
ment under the trunk floor).
̈ Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
̈ Fit cover and snap into place.
Rear of vehicle
2 Cover on right side of rear bumper
To remove cover:
̈ Press mark on cover in the direction of
the arrow.
̈ Fold cover down to reveal the threaded
hole for the towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located in the storage compart-
ment under the trunk floor).
̈ Screw towing eye bolt in to its stop and
tighten with lug wrench.
To reinstall cover:
̈ Fit cover and snap into place.