beautypg.com

Mercedes-Benz CLS-Class 2007 Owners Manual User Manual

Page 218

background image

217

Controls in detail

Driving systems

Canceling cruise control

There are several ways to cancel the cruise
control:

̈

Step on the brake pedal.

The cruise control is canceled. The last
speed set is stored for later use.

or

̈

Briefly push the cruise control lever in
direction of arrow

3 (

page 216).

The cruise control is canceled. The last
speed set is stored for later use.

Setting a higher speed

̈

Lift the cruise control lever in direction
of arrow

1 (

page 216) and hold it

up until the desired speed is reached.

̈

Release the cruise control lever.

The new speed is set.

Setting a lower speed

̈

Depress the cruise control lever in
direction of arrow

2 (

page 216) and

hold it down until the desired speed is
reached.

̈

Release the cruise control lever.

The new speed is set.

i

The last stored speed is canceled when you

turn off the engine.

i

The cruise control automatically switches

off, if

ț

you step on the brake pedal.

ț

you depress the parking brake pedal.

In this case the segments in the multifunc-
tion display (

page 141) go out and no

warning sounds.

ț

the vehicle speed is below 20 mph
(30 km/h).

ț

the ESP

®

is in operation or switched off with

the ESP

®

switch (

page 96).

ț

you move the gear selector lever to position
N while driving.

The segments in the multifunction display
(

page 141) go out, and an acoustic warning

sounds.

!

Moving the gear selector lever to position N

while driving also cancels the cruise control.
However, the gear selector lever should not be
moved to position N while driving except to
coast when the vehicle is in danger of skidding
(e.g. on icy roads).

i

Depressing the accelerator pedal does not

deactivate the cruise control. After brief acceler-
ation (e.g. for passing), the cruise control will re-
sume the last speed set.

i

When you use the cruise control lever to de-

celerate, the brake system will automatically
brake the vehicle if the engine’s braking power
does not brake the vehicle sufficiently.