beautypg.com

Mercedes-Benz CLS-Class 2007 Owners Manual User Manual

Page 220

background image

219

Controls in detail

Driving systems

It is the driver’s responsibility at all times to

be attentive to road, traffic, and weather

conditions and to provide the steering, brak-

ing and other driving inputs necessary to re-

tain control of the vehicle.

Warning!

G

Distronic is a convenience system. Its speed

adjustment reduction capability is intended

to make cruise control more effective and

usable when traffic speeds vary. It is not

however, intended to, nor does it, replace

the need for extreme care. The responsibili-

ty for the vehicle speed and the distance to

the vehicle ahead, including most impor-

tantly brake operation to assure safe stop-

ping distance, always rests with the driver.

Distronic cannot take street and traffic con-

ditions into account.

Warning!

G

Distronic requires familiarity with its opera-

tional characteristics. We strongly recom-

mend that you review the following

information carefully before operating the

system.

i

USA only: This device has been approved by

the FCC as a “Vehicular Radar System”. The ra-
dar sensor is intended for use in an automotive
radar system only. Removal, tampering, or alter-
ing of the device will void any warranties, and is
not permitted by the FCC. Do not tamper with,
alter, or use in any non-approved way.

Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.

i

Canada only:

This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:

(1) This device may not cause interference, and

(2) this device must accept any interference re-

ceived, including interference that may
cause undesired operation of the device.

Removal, tampering, or altering of the device will
void any warranties, and is not permitted. Do not
tamper with, alter, or use in any non-approved
way.

Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.