Mercedes-Benz CLK-Class 2009 COMAND Manual - Manual (Page 53)

52
Audio
Radio operation
The scan function will begin.
End scan function and play a station
̈ Press the Scan soft key again if you
hear the desired station.
or
The scan function stops automatically
when the first station received has been
scanned twice.
You can use the following functions:
ț Saving stations manually (FM, AM)
ț Saving stations automatically FM, AM
(
୴ page 53)
ț Selecting a station from the FM/AM
preset menu (
୴ page 54)
ț Selecting a station from the FM/AM
Auto presets (
୴ page 54)
Saving stations manually (FM, AM)
In the Radio main menu
̈ Activate the desired wave band
(
୴ page 48).
̈ Press one of the number keys, e.g. 2,
longer than 2 seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings (
୴ page 41).
The radio saves the current station at
the memory preset selected. The me-
mory preset selected will appear in the
status bar, e.g.
FM2 .
On the memory list
̈ Activate the desired wave band
(
୴ page 48).
̈ Press the Presets soft key.
The memory Preset menu will appear.
Memory functions
i
There are 10 presets available ( 1 -
9, 0).
An existing entry is overwritten in the
memory list when a new input is given.
209_MY09_A_US.book Seite 52 Montag, 26. Mai 2008 6:12 18