Mercedes-Benz CLK-Class 2009 COMAND Manual - Manual (Page 51)

50
Audio
Radio operation
Via frequency
̈ Press g or h.
or
̈ Push the joystick to g or G.
The radio will tune to the next
receivable station (FM, AM) or channel
(WB) of descending/ascending
frequency depending on the direction
of seek.
WB direct channel selection
̈ Press a number key 1 through 7.
Manual tuning (FM, AM)
̈ Activate the desired wave band
(
୴ page 48).
̈ Press g or h longer than 2 se-
conds.
The function rapidly scans the
frequencies.
̈ Press g or h repeatedly to
change the frequency step by step.
or
̈ Push the joystick to H or h.
Each push of the joystick will change
the frequency by one step.
FM Band
The frequency displayed will change in in-
crements of 0.2 MHz.
AM Band
Tuning will take place in increments of
10 kHz.
Station selection via direct frequency
entry (FM, AM)
E.g.: 102.7 MHz in the FM band
̈ Activate the desired wave band
(
୴ page 48).
̈ Press *.
An input line will appear.
̈ Enter the desired frequency with the
number keys within 8 seconds, e.g.
1027 for 102.7 MHz.
i
Frequenc. must be activated in the
Audio search function menu, which
appears in the multifunction display.
Access this menu from the
Settings... menu via the Vehicle
submenu ( ୴ page 30). For additional
information refer to separate
Operator’s Manual instructions.
i
The selected channel is not shown in
the status line.
209_MY09_A_US.book Seite 50 Montag, 26. Mai 2008 6:12 18