Controls in detail – Mercedes-Benz E-Class 2009 Owners Manual User Manual
Page 216
Loading and storing
214
1
Handle
2
Cargo compartment cover
Rolling up the cargo compartment cover
X
Use handle
1
to pull cargo compartment
cover
2
down into the horizontal position.
X
Unhook cargo compartment cover
2
from
its anchorages on the left and right sides.
To do so, pull cargo compartment cover
2
slightly towards the rear and lower it.
X
Slowly guide cargo compartment cover
2
back until it stops.
Pulling out the cargo compartment cover
X
Pull out cargo compartment cover
2
towards the rear until it engages.
Removing the twin roller blind
X
Roll up cargo net and cargo compartment
cover
2
.
X
Fold both rear seat cushions forward
(
X
Fold the passenger-side rear seat backrest
forward (
X
Fold the driver’s side rear seat backrest
forward (
X
Push twin roller blind to the driver’s side out
of its anchorage on the seat backrest and
remove it.
The vehicle tool kit and jack are stored under
the rear cargo compartment floor. A loading
tray and a folding box are located under the
front cargo compartment floor.
Opening the cargo compartment floor
1
Front cargo compartment floor
2
Rear cargo compartment floor
3
Handle
X
Use handle
3
to open cargo compartment
floor
1
or
2
.
Controls in detail