Capacities, Technical data – Mercedes-Benz M-Class Hybrid 2010 Owners Manual User Manual
Page 40
Vehicle components and their respective
lubricants must match. Therefore only use
products tested and approved by Mercedes-
Benz.
For information on tested and approved
products, contact an authorized Mercedes-
only).
Comply with all valid regulations with respect
to handling, storing, and disposing of service
fluids. Otherwise you could endanger persons
or the environment.
Keep service fluids out of the reach of
children.
For health reasons, you should prevent
service fluids from coming into direct contact
with your skin or clothing.
If a service fluid is swallowed, contact a
physician immediately.
Model
ML 450 HYBRID
Capacity
Fuels, coolants,
lubricants, etc.
Engine with oil filter
8.5 US qt (8.0 l)
Approved engine
oils
Automatic
transmission
13.4 US qt (12.7 l)
MB Automatic
Transmission Fluid
Front axle
1.2 US qt (1.1 l)
Hypoid gear oil
Rear axle
1.2 US qt (1.1 l)
Hypoid gear oil
Transfer case
0.53 US qt (0.5 l)
MB Automatic
Transmission Fluid
Power steering
approx. 1.3 US qt (1.2 l)
MB Power Steering
Fluid or approved
Dexron III ATF
Brake system
0.63 US qt (0.6 l)
MB Brake Fluid
(DOT 4+)
Cooling system
approx. 10.0 US qt (9.5 l)
MB 325.0
Anticorrosion/
Antifreeze
Low temperature
cooling system
approx. 2.0 US qt (1.9 l)
Fuel tank
23.8 US gal (90.0 l)
Premium unleaded
gasoline (Minimum
Posted Octane 91
[Avg. of
96 RON/86 MON])
Fuel tank reserve
approx. 3.4 US gal (13.0 l)
38
Technical data
164_ZA; 2; 2, en-US
d2ureepe,
Version: 2.11.8.1
2009-05-12T15:08:04+02:00 - Seite 38