Setting the air distribution, Setting the airflow, Sets the airflow, left – Mercedes-Benz S-Class 2012 User Manual
Page 297: Sets the airflow, right, Sets the air distribution, left, Sets the airflow, Sets the air distribution, right, Climate control, Operating the climate control system

Setting the temperature in the rear
compartment using the front control
panel
X
Turn the SmartKey to position
2 in the
ignition lock.
X
Activate the Y rear compartment
function via COMAND (
The rear-compartment climate control can
be controlled via the front control panel
using the Y rear compartment function.
X
To increase/reduce: press the w
rocker switch up or down.
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
i
To return to the standard display, activate
the front climate control function via
COMAND (
i
The rear display changes to the standard
display automatically after five seconds.
Setting the temperature in the rear
compartment using the rear control
panel
X
Turn the SmartKey to position
2 in the
ignition lock.
X
To increase/reduce: press rocker
switch H or M up or down (
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
Setting the footwell temperature
The footwell temperature can be set via
COMAND (
Setting the air distribution
Air distribution settings
The air distribution can be set individually for
the driver's and front-passenger sides.
¯
Directs air through the defroster vents
P
Directs air through the center and side
air vents
O
Directs the airflow through the
footwell air vents
S
Directs air through the center, side and
footwell vents
a
Directs air through the defroster and
footwell vents
_
Directs air through the defroster,
center, side and footwell vents
b
Directs air through the defroster,
center and side air vents
W
Sets the air distribution to automatic
Setting the air distribution in the front/
rear compartment using COMAND
The air distribution can be set using COMAND
(
Setting the rear-compartment air
distribution using the rear control panel
X
Turn the SmartKey to position
2 in the
ignition lock.
X
Press rocker switch I or L up or down
repeatedly (
air distribution symbol is shown in the
display.
Setting the airflow
Setting the front-compartment airflow
using the front control panel
You can select different airflow settings for
the driver's and front-passenger sides as well
as for the rear compartment.
You can also use COMAND to set the airflow
(
X
Turn the SmartKey to position
2 in the
ignition lock.
X
To increase/reduce: press the K
rocker switch up or down.
Operating the climate control system
295
Climate control
Z