Comand, Navigation – Mercedes-Benz S-Class 2012 User Manual
Page 162
on the same street: call up an address
destination from the last destinations.
X
Select
Change
by turning cVd and sliding
ZVÆ the COMAND controller and press
W to confirm.
All destination entry functions are
available.
X
Edit/enter the destination as described for
destination entry (
Entering a destination using the map
Calling up the map
X
To activate navigation mode: press the
S function button once or twice.
X
To show the menu: press W the COMAND
controller.
X
Select
Destination
in the navigation
system menu bar by turning cVd the
COMAND controller and pressing W to
confirm.
X
Select
Via Map
and press W to confirm.
You see the map with the crosshair.
:
Current vehicle position
;
Crosshair
=
Details of the crosshair position
?
Map scale selected
Display = depends on the settings selected
in "Map information in the display"
(
page 185). The current street name can
be shown, provided the digital map contains
the necessary data, or the coordinates of the
crosshair if the geo-coordinate display is
switched on and the GPS signal is strong
enough.
Moving the map and selecting the
destination
X
To scroll the map: slide XVY, ZVÆ or
aVb the COMAND controller.
X
To set the map scale: as soon as you turn
cVd the COMAND controller, the scale bar
appears.
X
Turn cVd until the desired scale is set.
Turning clockwise zooms out from the map;
turning counter-clockwise zooms in.
X
To select a destination: press W the
COMAND controller once or several times.
You will see either the address entry menu
with the destination address or, if COMAND
is unable to assign a unique address, a
selection list.
X
Select a destination by turning cVd the
COMAND controller and press W to
confirm.
If the destination is within the limits of the
digital map, COMAND attempts to assign
the destination to the map.
If the destination can be assigned, you will
see the address entry menu with the
address of the destination. If not, you will
see the entry
Destination from Map
.
X
To start route calculation: select
Start
and press W to confirm.
160
Navigation
COMAND