Comand, At a glance – Mercedes-Benz S-Class 2012 User Manual
Page 126
switch SPLITVIEW on and off
(
The SPLITVIEW screen remains on for
approximately 30 minutes after the SmartKey
has been turned to position
0 in the ignition
lock. After this time or after the SmartKey has
been removed, the settings on the front-
passenger side are saved for approximately
30 minutes longer. After this period,
reactivation on the front-passenger side
means that the settings from the driver's side
will be used.
Cordless headphones for the front
passenger
There are different cordless headphones for
the front passenger and the rear
compartment.
The cordless headphones for the front
passenger can be identified by SPLITVIEW
symbol : on the headband.
The cordless headphones for the front
passenger cannot be used in the rear
compartment. Equally, the headphones for
the rear compartment cannot be used by the
front passenger.
Swiveling the COMAND display and
setting the brightness
You can swivel the COMAND display
5
. The
buttons are located beside the COMAND
display.
Swiveling
:
To swivel the display to the left
;
To swivel the display to the right
Setting the brightness
:
Brightness of the instrument cluster
lighting
;
Brightness of the COMAND display
Brighter or dimmer:
X
Turn control : or ; clockwise or counter-
clockwise.
i
If Night View Assist Plus is activated, only
the brightness of the multifunction display
is adjusted with control :.
Display design
When the default settings are selected, the
display automatically switches between day
design and night design.
You can change these settings using
COMAND (
5
Not with SPLITVIEW.
124
At a glance
COMAND