Clima te contr ol, Operating the climate control systems – Mercedes-Benz CLS-Class 2014 Owners Manual User Manual
Page 141

Setting the airflow
X
Turn the SmartKey to position 2 in the
ignition lock (
Y
page 147).
X
To increase: press the K button.
X
To reduce: press the I button.
i
You can use 3-zone automatic climate
control to set the airflow in the rear
compartment separately.
If the battery is not sufficiently charged,
blower output may be reduced. As soon as
the battery is sufficiently charged, full blower
output will be available.
Switching the ZONE function on/off
X
To activate: press the á button.
The indicator lamp above the á button
lights up.
Dual-zone automatic climate control: the
temperature setting for the driver's side is
not adopted for the front-passenger side.
3-zone automatic climate control: the
temperature setting for the driver's side is
not adopted for the front-passenger side
and the rear compartment.
X
To deactivate: press the á button.
The indicator lamp above the á button
goes out.
Dual-zone automatic climate control: the
temperature setting for the driver's side is
adopted for the front-passenger side.
3-zone automatic climate control: the
temperature setting for the driver's side is
adopted for the front-passenger side and
the rear compartment.
Defrosting the windshield
You can use this function to defrost the
windshield or to defrost the inside of the
windshield and the side windows.
Switch off the "Windshield defrosting"
function as soon as the windshield is clear
again.
X
Turn the SmartKey to position 2 in the
ignition lock (
Y
page 147).
X
To activate: press the ¬ button.
The indicator lamp in the ¬ button lights
up.
The climate control system switches to the
following functions:
R
high airflow
R
high temperature
R
air distribution to the windshield and
front side windows
R
air-recirculation mode off
If the battery is not sufficiently charged,
blower output may be reduced. Once the
battery is sufficiently charged again, full
blower output will be available again.
X
To deactivate: press the ¬ button.
The indicator lamp in the ¬ button goes
out. The previously selected settings are
restored. Air-recirculation mode remains
deactivated.
or
X
Press the à button.
The indicator lamp in the ¬ button goes
out. Airflow and air distribution are set to
automatic mode.
or
X
Dual-zone automatic climate control: turn
temperature controls : or B clockwise
or counter-clockwise (
Y
page 131).
3-zone automatic climate control: turn
temperature controls : or B clockwise
or counter-clockwise (
Y
page 134).
or
X
Press the K or I button.
MAX COOL maximum cooling
The MAX COOL function is only available in
vehicles for the USA.
Operating the climate control systems
139
Clima
te
contr
ol