Seats, steering wheel and mirrors, Seats – Mercedes-Benz CLS-Class 2014 Owners Manual User Manual

Page 104

Adjusting the rear seat head restraint

angle

Pull or push the top of the head restraint

until it is in the desired position.

Removing and installing the rear seat

head restraints

WARNING

If head restraints are not installed and

adjusted correctly, they cannot provide

protection as intended. There is an increased

risk of injury in the head and neck area, e.g.

in the event of an accident or when braking.
Always drive with the head restraints

installed. Before driving off, make sure for

every vehicle occupant that the center of the

head restraint supports the back of the head

at about eye level.

Make sure that the rear window roller

sunblind has been retracted before the rear

head restraints are removed. You could

otherwise damage the roller sunblind.

To remove: pull the head restraint up to

the stop.

Press release catch : and pull the head

restraint out of the guides.

To re-install: insert the head restraint so

that the notches on the bar are on the left

when viewed in the direction of travel.

Push the head restraint down until you hear

it engage in position.

Adjusting the multicontour seat

The multicontour seat function is only

available for vehicles in Canada.

To adjust the thigh cushion

;

To adjust the backrest contour in the

lumbar region

To adjust the backrest contour in the

upper back region

To adjust the side bolsters of the seat

backrest

You can adjust the contour of the front seats

individually so as to provide optimum support

for your back and sides.

Turn the SmartKey to position 2 in the

ignition lock (

page 147).

102

Seats

Seats,

steering

wheel

and

mirrors