Kontron KISS DA335 - Manual (Page 10)

5. Installation Overwiew SATA II HDD Canister KISS DA 435
5.
Installation Overwiew
Before you remove or install the unit, make sure the unit is not turned on or connected to the AC power.
Warning
5.1. Removing the HDD Tray from the enclosure
1. Press the latch to the right by the thumb.
2. Pull the tray door outward by the forefinger at the same time.
3. Pull the HDD tray from the bay gently.
4. Secure the HDD to the tray by using four mounting screws shown as below.
Fig. 3: Bottom view of HDD tray
5. Slide the HDD tray into drive slot until the handle is locked.
6. Repeat step 1 to 5 for all remaining HDD trays.
www.kontron.com 9