Kontron CPCI Backplane - Manual (Page 28)

General CPCI Backplane
Page 14 © 2005 Kontron Modular Computers GmbH ID 24229, Rev. 03
2422
9.03.UG.VC.051007/14565
3
P R E L I M I N A R Y
5. Product Documentation Organization
The product documentation organization for Kontron’s CPCI Backplanes is as follows:
1. CPCI Backplane Manual (ID: 24229)
2. CPCI Backplane Product Documentation Guide (ID: 24229, Sub-ID: PDG)
3. Specific Kontron CPCI Backplane Product Documentation (ID: 24229, Sub-ID: PDnn)
Item 1 above is represented by this manual which provides generic information about Kontron’s
CPCI backplanes. Item 2 is enclosed with this manual for referencing to applicable CPCI Back-
plane Product Documentation. Item 3 represents the individual product documentation for spe-
cific backplanes. For each backplane addressed in item 2 there is a separate document
available.
Each of the above items are maintained independently of one another, whereby item 2 always
reflects the current status of available product documentation.
6. Applied Standards
The Kontron Modular Computers' CompactPCI backplanes comply where applicable with the
requirements of the following standards.
6.1 CE Compliance
• Emission EN50081-1, EN 55011/EN 55022
• Immission EN50082-2, EN 61000-4
• Electrical Safety EN60950, VDE 0100, VDE 0805
6.2 Other Safety Standards
• UL, CSA, DVE, NEMKO
6.3 Mechanical Compliance
• Mechanical Dimensions IEEE 1101.10
6.4 Environmental Tests
• Vibration/Broad-Band IEC68-2-6
• Random Vibration IEC68-2-64 (3U boards)
• Permanent Shock IEC68-2-29
• Single Shock IEC68-2-27