Kontron CP3-BP4-M - Manual (Page 6)

PD02: CP3-BP4-M CPCI Backplane
Page 6 © 2002 PEP Modular Computers GmbH RID 24229 PD02, Rev. 01
5.2 Power Supply Connector
The input voltages to the power supply unit and the V1 ... V4 output voltages from the power
supply unit to the backplane are connected via a 32-position, DIN type M, female power sup-
ply connector.
Figure 3: Orientation and Pinouts of CP3-BP4-M Power Supply Connector
Warning!
System integrators must ensure that only power supplies which comply
with the pinout as provided in Table 3 are used with this connector!
Pins B2, B5, B28, and B31 do not comply with the CompactPCI Power
Interface Specification.