Kontron CP3-SVE-M180AC - Manual (Page 5)

CPCI Power Supply PD04: CP3-SVE-M180AC
RID 24139 PD04, Rev. 01 © 2002 PEP Modular Computers GmbH Page 5
2.2 Power Supply Connector
Figure 2: Orientation of the DIN
M24/8 Power Supply Connector
The V
EU
and V
US
input voltages to
the power supply unit and the
Vo1...Vo4 output voltages from the
power supply unit to the backplane
are connected via a 32-pole DIN
24/8 male power supply connector.
For the pinouts of the DIN M24/8
power supply connector please refer
to the following table.
N/C = Not connected.
Table 2: DIN M24/8 Connector Pinouts
Pin Function Pin Function
2 L1 (live connection) B.17 +3.3VL
5 N (neutral) B.18 +3.3VL
11 PE (earth protection) B.19 +12VL
A.13 INT (internally connected) B.20 -12VL
A.14 N/C C.13 N/C
A.15 INT (internally connected) C.14 DEG
A.16 OVF C.15 INT (internally connected)
A.17 +5VF C.16 +3.3VL
A.18 +3.3VL C.17 +3.3VL
A.19 +12VL C.18 +3.3VL
A.20 -12VL C.19 +12VL
B.13 +3.3VL C.20 -12VL
B.14 +3.3VL 22 +5VL
B.15 +3.3VL 25 OVL
B.16 +3.3VL –