Kontron COMe Ref.Carrier-i T10 - Manual (Page 7)

COMe Reference Carrier-i Type 10 / Specification
4
3 Specification
3.1 Functional Specification
» COM Express® COM.0 Rev 2.0 baseboard compatible to Type 10 pin-out based modules
» Designed for extended temperature
» Single supply industrial or commercial power connector (5.5 – 20V)
» 2 x miniPCIexpress
» SIM Card Slot connected to miniPCIexpress
» 2x SATA
» LVDS (40pin JILI FFC40 connector)
» 1 x DDI (either DVI-D (SIL1364 SDVOtoDVI) or Display Port, depends on module capability)
» 1x Ethernet RJ45
» 4 x USB 2.0/1.1 (2x front panel, 2x pin header)
» 1 x USB Client
» Kontron feature connector
» Front panel connectors (HDD Act., Reset and Power Switch)
» Status LED
» µSD-Card Socket
» GPIO pin header for module GPIO (muliplexed with SD-Card)
» LID and SLEEP support
» Power Control functions (Power Button override, module single supply, power consumption measurements)
» Analo Devices AD1882AJCIZHDAudio Codec
- Front panel audio
- Optical S/PDIF output
- Digital S/PDIF output
» Serial COM port on SER0
» CAN on SER1
» Smart Battery Connector for batteries between 7.2V to 14.4V