Kontron COMe Ref.Carrier-i T10 - Manual (Page 40)

COMe Reference Carrier-i Type 10 / Compatibility Matrix
37
8 Compatibility Matrix
The COM Express® Eval Type 10 supports Computer-on-Modules following PICMG COM.0 Revision 1.0 pin-out Type 1 or
COM.0 revision 2.0 pin-out Type 10.
See table below wich features are supported by Kontron's COM Express® ultra form factor modules 'nanoETXexpress':
Con Feature nanoETXexpress-SP (Type1) nanoETXexpress-TT (Type10)
J15 ATX 12V Power 4.75V - 14V 4.75V - 14V
J25 PCIexpress Slot A if PCIe Switch is disabled if PCIe Switch is disabled
J26 PCIexpress Slot B if PCIe Switch is enabled if PCIe Switch is enabled
J27 PCIexpress Slot C if PCIe Switch is disabled if PCIe Switch is disabled
J41 ExpressCard YES, but USB#5 is USB 2.0 only YES
J38 PCI Slot0 if PCIe Switch is enabled YES
J39 PCI Slot 1 if PCIe Switch is enabled YES
J41 Express Card if PCIe Switch is enabled YES
J34 SATA1 on variants without onboard LAN YES
J61 USB #4 / USB #6
Ethernet RJ45 USB 2.0 only No USB #6
J44 PWM FAN (SIO/Module) SIO YES / Modoule NO SIO YES / Module optional
J68 DVI-D (SDVO2DVI) Optional YES
J74 LPC FWH for external BIOS YES NO
J76 SPI Flash for external BIOS NO YES
J78 RS232 COMA from module NO YES
J79 RS232 COMB from module NO YES
J83 SER0 from module NO YES
J84 SER1 from module NO YES
J92 LID NO Optional
SW6 SLEEP NO Optional