3 jumpers, Jumpers – Kontron MSMSA104EX User Manual
Page 21
MSMSA104EX
/ MSMSA104EX Connectors & Jumpers
www.kontron.com
19
5.3 Jumpers
The Jumpers for the USB0 and USB1 circuit on this product:
Default settings in bold!
Jumper
Structure
Open
Closed
J4
USB1
Enable
Disable
J5
USB0
Enable
Disable
Attention
There are only two USB ports on the PCIe bus.
If different PCI/104-Express boards with additional USB ports are being used, then the board which will
have the USB ports available must be selected.
Jumpers J4 (USB1) and J5 (USB0) enable or disable the two ports; if they are open, the USB ports are
enabled. Close these jumpers if the two USB ports are already used on another PCI/104-Express board.
It is also possible to enable one USB port on each board but be careful that USB0 is enabled on one
board and USB1 on the other board!
- CP3003-SA uEFI BIOS (72 pages)
- CP3003-SA (36 pages)
- CP3002 (38 pages)
- CP3002-RC uEFI (64 pages)
- CP-RIO3-05 (42 pages)
- CP3002-RC (30 pages)
- CP342 (52 pages)
- CP930 (46 pages)
- CP932 (52 pages)
- CP346 (72 pages)
- CP384 (66 pages)
- CP383 (74 pages)
- CP382 (58 pages)
- CP381 (60 pages)
- CP372 (64 pages)
- CP371 (60 pages)
- CP-RIO3-04S (38 pages)
- CP390 (36 pages)
- CPS3410 (9 pages)
- CPS3402 (9 pages)
- CPS3105 (9 pages)
- CPS3101 (9 pages)
- CPS3003-SA (19 pages)
- PB-SIO4 (34 pages)
- PB-SIO4A (34 pages)
- PB-DOUT8 (34 pages)
- VMOD-2 (82 pages)
- VSBC-32 (110 pages)
- VM42 (62 pages)
- Bootstrap Loader (24 pages)
- VMP1 with Netbootloader (120 pages)
- VMP1 (106 pages)
- NetBootLoader (86 pages)
- VMP2 (142 pages)
- VMP3 (154 pages)
- CP-RIO6-923 (32 pages)
- CP-RIO6-923-F (32 pages)
- CP-RIO6-001 (28 pages)
- CP-RIO6-001-HD-VGA (46 pages)
- CP-RIO6-M (20 pages)
- CP-RIO6-B (28 pages)
- CP6925 (42 pages)
- CP6002 uEFI BIOS (76 pages)
- CP6002 IPMI (40 pages)
- CP6002 (42 pages)