Kontron AM4120 - Manual (Page 27)

AM4120 Introduction
ID 1045-6958, Rev. 1.0 Page 1 - 11
General
Power Consumption Refer to Chapter 5, “Power Considerations” for information related to the
power consumption of the AM4120.
Temperature Range Operational: -5°C to +55°C Standard
-40°C to +70°C Extended, depending on processor version
and airflow in the system
Storage: -40°C to +70°C
Mechanical Single Module:
• Mid-size version
Dimensions Dimensions of the AM4120:
Mid-size: 181.5 mm x 73.5 mm x 18.96 mm
Board Weight Mid-size with heat sink: 240 grams
COP/JTAG Two interfaces:
• One processor JTAG interface routed to the onboard debug connector
for debugging purposes
• One JTAG interface connected to the AMC Card-edge connector for de-
bugging and manufacturing purposes
S
oftware
Bootloader: U-Boot DENX “U-Boot” (Universal Boot Loader) with Kontron specific modifications to
support the AM4120 requirements
Management: IPMI Module Management Controller Firmware providing the following features:
• The MMC is accessible via IPMB-L and one KCS interface with interrupt
support
• The MMC Firmware can be updated in the field through all supported
onboard interfaces using the function “fwum...” of the open-source tool
“ipmitool”. For further information on the ipmitool refer to the
sourceforge.net website.
• Two MMC flash images with automatic roll-back capability in case of an
upgrade Firmware failure
• Board supervision and control extensions such as board reset, power
and Firmware Flash control, etc
Operating Systems The board is offered with various Board Support Packages including VxWorks
and Linux operating systems. For further information concerning the operating
systems available for the AM4120, please contact Kontron.
Table 1-2: AM4120 Main Specifications (Continued)
AM4120 SPECIFICATIONS