Kontron AM4100 - Manual (Page 25)

AM4100 Introduction
ID 36126, Rev. 2.0 Page 1 - 7
P R E L I M I N A R Y
1.4.2 Front Panel
Figure 1-2: AM4100 Front Panel Versions
3
2
1
0
0
1
2
3
AM4100
A
B
0
1
2
3
AM4100
A
B
Mid-size Full-size
Module Management LEDs
• LED1 (red): Out-of-Service LED
• LED2 (red/green/amber): Health LED
• HS LED (blue): The hot swap indicator provides basic feedback to the
user on the hot swap state of the module. The HS LED
states are off, short blink, long blink, and on.
User-Specific LEDs
• ULED3 (red/green/amber): AMC Eth. port A link signal status or POST code LED
• ULED2 (red/green/amber): AMC Eth. port B link signal status or POST code LED
• ULED1 (red/green/amber): Freely configurable or POST code LED
• ULED0 (red/green/amber): Freely configurable or POST code LED
Connectors
• Serial Connector
• Gigabit Ethernet Connector
For further information on the LEDs used on the AM4100, refer to section 2.3.1, “Front Panel
LEDs”.