3 board specifications, Table 1-1 board specifications – Kontron RTM8940 User Manual
Page 16
Product Description
3
www.kontron.com
1.3
Board Specifications
Table 1-1:Board Specifications
* Designed to meet or exceed
Features
Description
Compatible Products
•
AT8910
•
AT8940
Compliancy
•
PICMG3.0 R3.0
•
PICMG3.1 R2.0
•
PICMG HPM.1
IPMI Features
•
Management Controller compliant to PICMG 3.0 and IPMI v2.0 .
•
Management Controller is run time field reprogrammable without payload impact.
•
Robust fail safe reprogramming implementation (which includes two firmware images) that
could perform automatic or manual rollback if a problem occurs during critical reprogramming
phase.
•
Remote upgrade capability (via IPMB).
•
Management Controller self test which can detect failure under its code integrity and triger an
automatic rollback.
Supervisory
•
Hardware system monitor through IPMI (voltages, currents, temperature), temperature
monitor/alarm; board temperature sensor, power failure.
Mechanical
•
322.25 x 93.74 x 29 mm
Power Requirements
•
10W Typical
Environmental
Temperature*
Operating: 0-55°C/32-131°F with 30CFM airflow
Storage and Transit: -40 to +70°C/-40 to 158°F
Environmental
Humidity*
Operating: 15% to 90% @55°C/131°F non-condensing
Storage and Transit: 5% to 95% @ 40°C/104°F non-condensing
Environmental Altitude*
Operating: 4,000 m / 13,123 ft
Storage and Transit: 15,000 m / 49,212 ft
Environmental Shock*
Operating: 3G each axis
Storage and Transit: 18G each axis
Environmental
Vibration*
Operating: 5-200Hz. 0.2G, each axis
Storage and Transit: 5Hz to 20Hz @ 1 m2/s3 (0.01g2 /Hz) (flat)
20Hz to 200Hz @ -3dB/oct (slope down)
Reliability
•
Whole board protected by active breaker
•
USB voltage protected by active breaker
Safety / EMC
Meet or exceed:
•
Safety: UL 60950-1; CSA C22.2 No 60950-1-03; EN 60950-1:2001; IEC60950-1
•
EMI/EMC: FCC 47 CFR Part 15, Class B; CE Mark to EN55022/EN55024/EN300386
Warranty
Two years limited warranty