Koala Kare 889-KIT - Manual

Tools Required:
Phillips Head Screwdriver or 1/8” Allen
Wrench
1. Open Baby Changing Station. Remove the
screws that secure the old strap to the unit.
Discard old strap and screws.
2. Position the new strap on the unit with the
buckle towards the right hand side of the unit.
3. Take one of the screws provided and insert
it through the hole in the chafe tab and into
the hole in the right hand side of the bed.
Secure the screw into the screw insert.
4. Repeat step 3 for the other end of the strap
by securing the strap to the left hand side of
the bed.
5. Ensure that the strap is buckled. Clean up
mess and close unit.
KB101 and KB111 REPLACEMENT STRAP
INSTRUCTIONS
P/N 889-KIT
Koala Kare Products ǁ 6982 S Quentin St. ǁ Centennial, CO 80112 Toll Free: 888.733.3456 ǁ 303.539.8300 ǁ Fax: 303.539.8399
www.koalabear.com
®
P/N 427 January 2011
Hardware Supplied Two 5/8” Phillips Pan Head Machine Screws