Kidco G4111 - Manual (Page 4)

U S E R G U I D E G4100/G4101 G4110/G4111 Gateway
®
3
1
G4100/G4101 (Only)
Housings, bars and square
extension tubes (5 1 /
8
”) from gate
may be needed. Depending on how
many extensions are being added,
insert the appropriate square
extension tubes (c) into gate ends.
Connect the bar (d) to one upper
extension housing (a) and one
lower extension housing (b).
Push assembly over extension
tubes. There should be no metal
showing from extension tubes.
It may be necessary to apply
pressure to tubes to ensure they
are fully inserted into gate ends.
Slide spindles into extension tubes.
2 G4110/G4111 (with or
without G4100/G4101)
Insert 4
3 / 4 ” square extension
tubes (c) into gate ends.
Connect the extension (d) to
gate. There should be no
metal showing. It may be
necessary to apply pressure.
Slide spindles into extension.
NOTE: If using additional
extensions, 12.5” extension
needs to be installed to
gate first.
See applicable Gateway ®
series user guide to
complete installation.
Installation
1
2
(d)
(c) (a)
(b) (c)
(c) (c)
(c) (c)
(d)
6
C3
C2
A Cubierta de extensión superior (2)
B Cubierta de extensión inferior (2)
C1 Tubo de extensión 7
7 /
8
” (2)
C2 Tubo de extensión 10 1 / 2 ” (2)
D Barra de extensión (2)
Lista de piezas G4100/G4101
C3 Tubo de extensión 4 3 / 4 ” (2)
D Extensión
Lista de piezas G4110/G4111
C1
D
A
B
D
G4100/G4101 G4110/G4111 Gateway
® G U Í A D E L U S U A R I O