Alternator relocation – Karcepts KPS0X User Manual
Page 5
3. ALTERNATOR RELOCATION
1.
Secure the alternator relocation bracket with the two M10 x 40mm long flange
bolts (Honda Part #: 95701-10040-08). Torque to 32 ft-lbs.
2.
Locate the alternator spacer(s) (either 1 or 3 spacers are included, depending
on Karcepts Kit Part # being used), the single M8 x 100mm long flange bolt
(Honda Part #: 95701-08100-08), and two M8 x 50mm or M8 x 70mm long
flange bolts (Honda Part #: 95701-08050-08 or 95701-08070-08). M8 x 70mm
bolts are used when 3 spacers are provided.
or
3.
To prevent arcing, it is advised to first disconnect the negative and positive
battery cables. Next, unbolt the alternator and discard the factory bolts.