Karcepts KFSB-AP-XX - Manual (Page 2)

Parts Included With S2000 Front Sway Bar Kit
DESCRIPTION QTY
SOLID SWAY BAR MOUNT 2
M10X25 FLANGE BOLT 4
SPLINED SWAY BAR CENTER SECTION 1
CLAMP COLLAR 2
LEFT SWAY BAR ARM 1
RIGHT SWAY BAR ARM 1
M12X50 SOCKET HEAD CAP SCREW 2
SWAY BAR ENDLINK 2
3/8" NYLON-INSERT LOCKNUT 2
3/8" FLANGE NUT *4
HEAVY DUTY CABLE TIES 4
* Only quantity of 2 needed for assembly. Quantity of 2 extra provided as spares.
Tools Required
Torque Wrench
Sockets - 17mm, 14mm, 10mm hex bit, 9/16", 3/16" hex bit
1/2" Open End Wrench
9/16" Ratcheting Combination Wrench
Tape Measure
Rubber Mallet