Chicago Electric 39954 - Manual (Page 5)

Page 5 SKU 39954 For technical questions, please call 1-800-444-3353.
When the engine is running, turn the Safety Switch to the OFF position, disconnect the 7.
black clamp first, and return the cable to its stored position on the jumpstarter system.
Disconnect the red clamp and return the cable to its position on the system.
8.
As soon as possible, recharge the 3 in 1 Jump Start / Air Compressor. 9.
Using the 12 V Receptacle
Lift up the cover of the Cigarette Lighter Receptacle (18) 1.
Insert the cigarette lighter Plug from the appliance into the Cigarette Lighter Recep- 2.
tacle (18).
Compressor Operation
Pressure Meter
Switch, Compressor (43)
Inflation Needle and Plastic
Adapters (37)
hose Connector
hose Compartment
1. Turn the main Power Switch on the front panel to the On position.
If inflating a tire, place the Hose Connector on the tire valve stem and press the con- 2.
nector lever down to lock in place.
If inflating a ball, air mattress, or other item, place the inflation needle or plastic
3.
adapter into the hose connector and press the connector lever down to lock in place.
Insert the adapter into the item to be inflated.
Turn the compressor power Switch (43) to the On position.
4.
note: Do not overinflate item. Check pressure gauge. Only run the Compressor for 10
minutes at a time. If more air is needed, wait 10 minutes before using again.
Turn Switch Off when inflation is finished.
5.
REV 08b