Jeep 2014 Cherokee - User Guide - Manual (Page 176)

Component Fluid, Lubricant, or Genuine
Part Capacities
Spark Plugs – 2.4L Engine
We recommend you use
MOPAR ® Spark Plugs
(Gap 0.047 in [1.2 mm])
—
Spark Plugs – 3.2L Engine
We recommend you use
MOPAR ® Spark Plugs
(Gap 0.043 in [1.1 mm])
—
Automatic Transmission
We recommend you only
use MOPAR ® ZF 8&9
Speed ATF™ Automatic
Transmission Fluid, or
equivalent.
—
Brake Master Cylinder
We recommend you use
MOPAR ® DOT 3 Brake
Fluid, SAE J1703 should
be used. If DOT 3, SAE
J1703 brake fluid is not
available, then DOT 4 is
acceptable. Use only rec-
ommended brake fluids.
—
CAUTION!
• Mixing of engine coolant (antifreeze) other than specified Organic Additive
Technology (OAT) engine coolant (antifreeze), may result in engine damage and
may decrease corrosion protection. Organic Additive Technology (OAT) engine
coolant is different and should not be mixed with Hybrid Organic Additive
Technology (HOAT) engine coolant (antifreeze) or any “globally compatible”
coolant (antifreeze). If a non-OAT engine coolant (antifreeze) is introduced into
the cooling system in an emergency, the cooling system will need to be drained,
flushed, and refilled with fresh OAT coolant (conforming to MS-12106), by an
authorized dealer as soon as possible.
• Do not use water alone or alcohol-based engine coolant (antifreeze) products.
Do not use additional rust inhibitors or antirust products, as they may not be
compatible with the radiator engine coolant and may plug the radiator.
• This vehicle has not been designed for use with propylene glycol-based engine
coolant (antifreeze). Use of propylene glycol-based engine coolant (antifreeze)
is not recommended.
MAINTAINING YOUR VEHICLE
174