Jeep 2013 Wrangler - User Guide - Manual (Page 110)

FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or
Genuine Part
Capacities
Engine Coolant–
3.6L Engine
We recommend you use MOPAR ®
Antifreeze/Coolant 10 Year/
150,000 Mile Formula OAT
(Organic Additive Technology).
10.5 Quarts (9.9 Liters)
Includes coolant
recovery bottle filled
to MAX level.
Engine Oil with filter–
3.6L Engine
We recommend you use API
Certified SAE 5W-20 Engine Oil,
meeting the requirements of
Chrysler Material Standard
MS-6395. Refer to your engine oil
filler cap for correct SAE grade.
6 quarts (5.7 Liters)
Engine Oil Filter–
3.6L Engine
We recommend you use MOPAR ®
brand Engine Oil Filters.
—
Spark Plug–
3.6L Engine
We recommend you use
MOPAR ® Spark Plugs
(Gap 0.043 in [1.1 mm]).
—
Automatic Transmission
We recommend you ONLY use
MOPAR ® ATF+4 ® Automatic
Transmission Fluid.
Failure to use ATF+4 fluid may
affect the function or perfor-
mance of your transmission.
—
Manual Transmission
We recommend you use MOPAR ®
Manual Transmission Lubricant.
—
Transfer Case
We recommend you use
MOPAR ® ATF+4 ® Automatic
Transmission Fluid.
—
Axle differential (front)
We recommend you use
MOPAR ® Gear & Axle Lubricant
(SAE 80W-90) (API GL-5).
—
Axle differential (rear)
226 RBI (Model 44) - We recom-
mend you use MOPAR ® Gear &
Axle Lubricant (SAE 80W-90)
(API GL-5). For trailer towing,
We recommend you use MOPAR ®
Synthetic Gear & Axle Lubricant
(SAE 75W-140). Models equipped
with Trac-Lok™ require an
additive.
—
Brake Master Cylinder
We recommend you use MOPAR ®
DOT 3 Brake Fluid, SAE J1703.
If DOT 3, SAE J1703 brake fluid
is not available, then DOT 4 is
acceptable.
—
MAINTAINING YOUR VEHICLE
108